Large Hydraulic Unit-Hydraulic Power Unit System!!!! New Lowered Price!!! Hydraulic Pumps Motors Flow Valve Start Price USD 8,000.00 Current Price USD 8,000.00 Time Left 11 days 6 hours 1 minutes Bid Count 0 Buy It Now Price - Reserve Price - Start Time Friday, November 21, 2008 End Time Tuesday, January 20, 2009 Location Mountain Green, UT See more about 'Large Hydraulic Unit-Hydraulic Power Unit System!!!!' Description   Industrial Hydraulic System-Hydraulic Power Unit   This is a robust and versatile Industrial Hydraulic System. This system was designed and built for our company in 2000. It had four years of use and was only used for about 4 months in each of those years. It is in great shape and has had limited use. Every component is in operable condition. We used this system to run up to nine individual pieces of hydraulic equipment. We ran hydraulically driven pumps and conveyer belts simultaneously with this system in order to conduct our manufacturing and processing elements of our business operations. Construction The 300 gallon tank of the unit was built with six chambers. The six chambered tank, combined with the volume-(300 gallon) provide excellent cooling properties for this industrial system. Each motor is mounted on top of an individual chamber. This was done to support the weight and vibration of each 15 hp electric motor. There are six access ports-(3 on each side) that allow access to each hydraulic pump and accessories. These access ports are easy to operate, seal well, and are well designed. The bottom of the six chambered tank is an I-beam frame. This I-beam has slots cut out in order to accommodate forklift tongs. This allows the unit to be easily moved and keeps the tank up off the floor of the facility.   KEY FEATURE!!!   One nice thing about this unit is that you don’t have to hook it all up at once if you don’t desire.  This makes the unit expandable and gives you a feature other power units do not. Many units utilize single 5hp, 10hp and 15 hp motors. This has four 15 hp motors and one 10 hp motor. You have options on how much you use based on your need and has the ability for a lot more if you needs or demand changes. This unit has 5-10 times to capacity and versatility or most hydraulic power units made!!!   Motors There are four 15 hp and one 10 hp motors mounted on top of the 300 gallon tank. These provide the drive for each of the individual Denison hydraulic pumps. The specs on the motors are provided below:   15 HP-Motor Specs: Manufacture: World Wide-Premium Efficiency Phase: 3 Model: WW15-24TC HP: 15 Encl: TEFC IP: 54 FR: 254TC Volt: 230/460 Amps: 35.4/17.7 HZ: 60 RPM: 1770 Type: VPHE S.F. 1.15 Design: B Inscl: F kvA Code: G-(Maybe C) Eff-FL: 91.7%3/4 90.5% Rating 40c Amb Cont DE-Brng 6309 ODE-Brng 6209 Power Factor: 0.84 Date Code: 2001.03 Usable on 208v network at 39 AMPS (NOTE: All four 15 HP Motors have the same specs)   10 HP Motor Specs Manufacture: World Wide-Premium Efficiency Phase: 3 Model: WW10-2151 Serial: 20210-BCJ HP: 15 Encl: TEFC IP: 54 FR: 215T Volt: 230/460 Amps: 24.8/12.4 HZ: 60 RPM: 1760 Type: VPHE S.F. 1.15 Design: B Inscl: F kvA Code: H Eff-FL: 90.2%3/4 90.6% Rating 40c Amb Cont DE-Brng 630822 ODE-Brng 650822 Power Factor: 0.83 Date Code: 2001.03 Usable on 208v network at 39 AMPS Cooling Fan/Heat Exchanger Manufacturer: ITT Bell & Gossett-Buffalo NY Model: AXD40-3 P/N: 5-704-40-007-001 Tube WP 250 Motor Specs: Manufacturer: Leeson Cat# 110048.00 Model: C6T17FC2E Phase: 3 RPM: 1725 Hz: 60 Volt: 208-230/460 HP: 1 Duty: Cont FLA 3.6-3.8 FLA: 1.9   Motor Control Switches/Breakers   The on/off switching devices for the four 15 hp and 10 hp motors are GE 300-Line Control switching boxes. The cooling heat exchanger also has a breaker devise. This is also a GE 300 line control. This set up allows each motor to be independently run. Because of this, you can step the number motors used based on varying hydraulic needs. You can run just one motor or all five depending on needs. All These electronic switches and breakers are mounted inline and are mounted on their own, independent frame. This frame is well supported and mounts to the floor near the system.     Hydraulic Pumps   Mounted at the base of each motor, mounted inside each tank is a Denison Hydraulics, model TB single vane hydraulic pump. Once the hydraulic system is set up and filled with hydraulic fluid the pumps are submerged. The Denison Hydraulic model TB single vane pump specs are: Model: TB 011 1L00 A103 Serial:  00J23 141 Code:  024 31397-0 Intake Size: 1 1/4 Output Size: ¾ The TB is a fixed displacement vane pump with a fixed clearance cartridge concept.The cast iron bodies and cam ring offer: High pressure up to 190 bar (2700 PSI). High mechanical efficiency up to 98%. 7 different flow displacements.  2 standard shafts.  2 different port connections. Bi-directional rotation can be achieved by changing cartridge position.  Because the TB is of a hydrostatic balanced vane design it offers: High volumetric efficiency (94%). Low noise level [64 dB (A) 1500 RPM].  High self-priming speed (3200 RPM).  Long life service.  High power to weight ratio (up to 5.7 Kw/kg).    Flow controls   Nine Flow Control Ports/Operating Stations provide hookup points to attach the independent hydraulic equipment. The inputs and outputs of each flow control have quick release couplers that allow the ability to quickly change your hydraulic accessories equipment based on needs or breakdown. The flow control allows you to adjust the pressure and flow of the hydraulic fluid to the hydraulic accessories. The manufacturer is Brand Hydraulics model #/FCR51-1/2     FC -- GENERAL INFORMATION The Brand, full range pressure compensating variable flow control is designed so that the orifice area varies as the lever is rotated. Fluid travels past the variable orifice, by the compensator spool and then out the controlled flow port. Therefore the flow out of the CF port is proportional to the orifice area which can vary from closed to wide open. The sum of the controlled flow and the excess flow equal the inlet flow and as the controlled flow increases the excess flow decreases. Both outlet flows are pressure compensated with a spool that maintains a constant flow while adjusting for pressure. Hunting between the compensated pump and our valve is dampened with a cross hole in the casting. Thus, the outlet flow is smooth and constant regardless of the pressure on the CF and EX port.   FEATURES: PRECISION GROUND PLATED SPOOL that assures long life. DIAMOND HONED SPOOL BORE provides consistent spool fit with low leakage. EVERY FC IS TESTED for shutoff, linearity, and pressure compensation. STANDARD 3-PORT allows for pressure compensated flow out of two ports. SPECIFICATIONS: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 28 --3/4 lbs. (13.0 kg). 30-Micron Filtration Recommended Torque to turn side lever spool.   - 40 in*lbs with 3000 psi on CF port.   - 40 ft*lbs with 3000 psi on EX port. MATERIALS: Ductile Cast Iron Body. Heat Treated Steel Spools. Buna N O-Rings. Consult factory for stainless steel rotary spool. Hydraulic Flow Divider Proportionator   The hydraulic system utilizes 5 Delta Power Hydraulic Flow Divider Proportionators   Features & Specs Delta Power Hydraulic Flow Divider Proportionator. 2 section divide and combine up to 21gpm evenly. Rated to 1500psi continuous and 2000psi intermittent. Will not be accurate for flow rates below 3gpm. 3/4"NPT inlet and 1/2"NPT outlets.   Heat Exchanger The hydraulic system dissipates heat generated from the operations via an AirEx - aluminum bar & plate air cooled heat exchanger manufactured by ITT Standard.Description: Compact bar and plate design, air-cooled unit. Up to 65% smaller than Fin Tube designs. Delivery: Typically One (1) week Materials: Aluminum Cooler, Painted Steel Shroud, Zinc Plated Steel Fan Guard, Polypropylene Blades w/ Aluminum Hub, Steel Mounting Brackets. Electric Motor Data: Single Phase: 115/208/230 Volt - 60 Hz Three Phase: 208-230/460 Volt - 60 Hz Noise Levels: dBA Scale measured at 1 meter Applications: Oil cooling with air, where compact size and rugged construction are a must. Unit uses a louvered fin design for use in clean environments. Performance Rating: Listed HP rating based on the ability to cool Max. GPM of oil (50 SSU) with an entering oil temperature minus an entering air temperature of 50 Deg F and a pressure loss under 15 psi   Other Features     Sight Glass to view status of hydraulic fluid Five 3000 psi pressure gauges to determine pressure within each individual subsystem   We are interested in selling this system because we are no long conducting operations for our business. The system is currently located in Mt Green Utah, approximately 45 minutes north of Salt Lake City, UT. Please let me know if you have any questions.   Shipping   Buyer is responsible for pick up or shipping. The hydraulic system is located in a storage trailer at our facility in Mt Green, Utah. I can load the unit and the seven 55 gallon drums of hydraulic fluid either onto your trailer or the shippers transport vehicle. The hydraulic system is approximately 4 ft wide, 8 ft long and 4.5 ft high. The approximate weight is 5000-6000 lbs. This does not include the weight of the 55 gallons drums. The drums are not completely full, all are about ¾ full. Please let me know if you have specific packing instruction.   Storage   We understand the issues on transportation and are willing to arrange free storage for up to 1 month. Upon purchase, we would like to draft a mutual contingency plan concerning storage longer than 1 month. This is important to us because we have other large equipment stored on site and cannot conduct activity that will jeopardize the ability to store our other assets. We are very reasonable people and can work through most all situations. We are motivated to sell this hydraulic system and understand that it will most likely take the combined cooperative efforts of the buyer and seller to get it done.   Respectful Bidding and Compliance to Ebay   Listing and selling an item like this is expensive and time consuming. Please keep this in mind if you are seriously interested in this hydraulic system. I have had eBay sales get messed up in the past and it hasn’t been a big deal. This ad and sale will be expensive for us. Just please be aware of this. Do not bid on the hydraulic system unless you are ready to pay for it and have a plan and understand the cost of transporting it. The item will be listed long enough for you to get your funds and do your homework. We are willing to help with this. This will limit the potential negatives created from a miss-bid or an aborted sale.   It is not in the spirit of eBay to haphazardly bid on eBay items, it can have significant effects on the seller’s end. We are motivated sellers looking for a good home for this hydraulic system. We know it is a large system, but we feel it is priced to sell considering replacement cost. It has had little use and has a lot of years left in it. Please work with us on this sale.   Deposit & Ad   A $500.00 deposit is required at the time of purchase. This will be done via PayPal.   We are also trying to sell this hydraulic system through other channels and have had a few people come look at it. There are other interested buyers and I do reserve the right to end the eBay sale at anytime if I find a buyer outside eBay.   Questions   Please write with inquiries and questions-serious inquiries only. Thanks     Thank You, Thanks for Looking  & Happy Bidding!!!           Place a Bid!